Top 5 quietest cyclone dust collector

If you’re someone who works with power tools or machinery, then you know how important it is to have a reliable and effective dust collector. But sometimes, the noise that these machines make can be unbearable. That’s why I’ve put together a list of the top 5 quietest cyclone dust collectors on the market.

Not only will these machines effectively remove dust and debris from your workspace, but they’ll also do it without disturbing your peace and quiet. So, whether you’re a professional woodworker or just someone who enjoys DIY projects, read on to find the perfect dust collector for your needs.

jet dust collector: editor's choice

Editor’s Choice

Let me help you make a quick decision using the table I have mentioned below:

ModelDecibel (dB) ratingAirflow rate (CFM)Power consumption (Watts)Dust storage capacity (Gallons)Filter type
Festool 574837 Midi62 dB130 CFM1200 Watts3.96 GallonsHEPA filter
WEN 3410 3-Speed50-60 dB300/350/400 CFM50 Watts5-micron filter
Jet DC-1100VX-CK70-80 dB1100 CFM1100 Watts5.3 Gallons2-micron filter
Bucktool DC30A-1 Wall-Mounted65 dB300 CFM750 Watts1-micron filter
Fein Turbo II X Wet/Dry66 dB151 CFM1100 Watts8.4 GallonsHEPA filter

Quietest Dust Collector

1. Festool 574837 Midi Dust Extractor

Since it strikes the ideal balance between being quiet and useful, the Festool Midi is our top pick for the finest quiet dust collector. It falls squarely in the middle of the advised range with a minimum noise level of 62dB (and a maximum of 72dB). Yet, 62dB is still considerably quieter than a conventional vacuum cleaner.

It has a HEPA filter, which removes pollutants as small as 0.3 microns. This type of filter is much more effective than typical dust collector filters and is similar to those found in AC units, air purifiers, and vacuum cleaners.

Both stationary shop tools and portable power tools can be used with the unit because you can connect the hose directly to your gear. It would be best if you didn’t have to empty it too frequently because it has a 3.9-gallon container and 130 CFM suction power.

dust collector white colored

The touch panel is simple to use when using gloves or if the machine is dusty. This version of the Midi now has Bluetooth capability, and in essence, it enables you to turn on the extractor remotely. Whether or not this is a useful feature is up for debate, but it is present nonetheless.

One drawback of the HEPA filter is that it costs more to replace than regular filters and that it might diminish suction power when it gets dirty. You might, however, give it a cold water rinse; this will affect how well it works.

What we like? 

  • A good mix between utility and noise.
  • Using a touch panel while wearing gloves is helpful.
  • Moreover, it functions as a shop vac.

What we do not like? 

  • A dirty HEPA filter reduces suction.

2. WEN 3410 3-Speed Air Filtration System

As the name implies, you put an air filtration device on the ceiling to remove airborne dust. It’s a helpful addition to a dust collector because you can leave it running after a day of carpentry while away. It specifically contains a 1-micron filter, meaning it captures particles that a device like the Jet model could have missed.

It’s the quietest tool on this list, with a 50–60 dB noise rating. Because this is an air filter, the Fein is still the quietest dust collector.

If it’s put on the ceiling, the remote control that comes with it is pretty helpful! With the remote, you can set the built-in timer and change between the 3-speed levels. You can do this to ensure that the air is pure for the next time you’re in the workshop by filtering it after you finish working.

wen dust collector

The unit incorporates a carrying handle, making transportation quite simple. Nothing is keeping you from leaving it on a workbench rather than putting it on the ceiling, even though it is not intended for tabletop use.

If you want to place it from the ceiling, some customers complain that the 6-ft. power chord is a little on the short side. Either a nearby outlet or an extension cord is required. Even while this isn’t a major problem, it’s nevertheless important to be aware of it before you buy so you can put the appropriate additions in place.

What we like?

  • A useful addition to a dust collector for a workshop
  • Either leave it on a worktop or mount it to the ceiling

What we do not like?

  • The power cord is too short.

3. Jet DC-1100VX-CK

A reasonably heavy-duty dust collector is the Jet DC-1100VX-CK. Before moving air through the 2-micron filter, it separates airborne debris using vortex technology. Significantly, this enhances waste bag packing and filtration effectiveness. The removable bags can hold a lot of trash because of their 5.3 cu. ft. capacity.

This dust collector produces noise at an average level of 75 dB. This isn’t the quietest on the list, but it is, considering the size of the motor. It is almost twice as strong as the Bucktool model above, with 2,615 Pa and 1,100 CFM. It’s still within the acceptable limits for noise emissions.

jet dc dust collector

Depending on the size of the hose you require, you can set it up with two 4″ ports or one 6″ port. This means that you may use it with just about any shop tool, albeit due to its size and capacity, it works better with stationary tools than with handheld power tools.

It doesn’t have different speeds, and there is an on/off switch. This is a restriction, but it’s unnecessary when working with large tools and a lot of dust. The motor is always oiled, requiring less maintenance, and new bags snap-in.

The difficulty of movement is one drawback mentioned by some users. The unit is top-heavy and comes on casters. As a result, disassembling, moving, and reassembling it is easiest. Of course, this is a pain, so it could be simpler to purchase longer hoses simply! The Baileigh DC-600C will work if you want a more portable device with comparable wattage.

What we like? 

  • Power and noise emissions are well-balanced
  • Technology using vortex filtering is effective
  • Easy to maintain

What we do not like? 

  • Difficult to move about

4. Bucktool DC30A-1 Wall-Mounted Dust

Based on whether you prefer it to function as a portable, quiet dust collector, it may be placed on the wall or moved around on casters.

The key distinction between a proper dust collector and a common one is the size of the hose. The Bucktool includes a 4″ hose that you essentially keep close to your work area, in contrast to the Festool’s direct tool connection. Even though this is less useful, it does mean that you can use it with any tool.

Bucktool does not provide a noise level listing. Fortunately, a nice user tested it and discovered that it produces noise of about 69 dB. Despite being at the higher end of the spectrum, you are exempt from wearing hearing protection.

buck tool dust collector

The appliance has a 3.1 cu. ft. dust bag, a 2-micron filter, and an airflow rating of 550 CFM. This is far less than the Festool, yet it is sufficient to remove most wood and metal debris. There is also a wall-mounted remote starter, which is useful.

Although the suction power isn’t as strong as some other models, some consumers claim it is still acceptable for the price. Verify the device’s static pressure when evaluating whether it has good suction. That is just 1,440 Pa in the case of the Bucktool, which is 16 times less than the Festool. This is often the lowest price you’d want to pay for a device like this, and it offers the performance you’d want from an affordable model.

What we like? 

  • Economical dust collector
  • Noise emissions of 69dB.
  • It may be used as a portable tabletop dust collector or fixed on a wall or on supplied casters.

What we do not like? 

  • Less powerful suction than models that cost more.
Also Read: Quietest Electric Fuel Pump

5. Fein Turbo II X Wet/Dry Dust Extractor

In that it functions primarily as a vacuum cleaner, the Fein Turbo II is comparable to the Festool Midi. It may be used with portable power tools because you connect it straight to the tool. It has a HEPA filter similar to the Festool that filters out particles as small as 0.3 microns. But, it is bigger and more potent than the Festool, with a CFM of 151 and a 9.2-gallon canister.

It’s perfect for typical DIY projects because it can be used as a wet vac and a normal vacuum cleaner. Although it is appropriate for use in a workshop, heavier tools may require a different adaptor. Yet, the Jet or Bucktool model will be more suitable if you operate primarily with static tools. But you could also use it as a portable tabletop dust collector.

It makes a respectable amount of noise as well. It is the quietest dust collector on our list, producing between 53 and 69 dB. The Fein weighs only 31 pounds, is portable, and has a variety of accessories.

Despite performing better, the Festool retains its position as the top selection. This is because it is a higher-quality computer overall and features a touch panel with superior functionality. Both will effectively remove dust, but choose the Fein if you want tranquility over anything else.

The length and rigidity of the hose are two problems some customers have reported. Although it might not seem like a big matter, working in a small space can undoubtedly cause problems. Choose the Festool if you believe this would be a problem (for example, if you work in confined spaces or on construction sites).

What we like? 

  • Strong and silent dust collector
  • Big containers reduce the need for bag changes
  • Portability and lightness

What we do not like?

  • The hose is inflexible and lengthy, making it challenging to maneuver in small spaces.

How do I make my dust collector quieter?

here’s how you can make your dust collector quieter:

  1. Install sound insulation: One way to reduce the noise generated by your dust collector is to install sound insulation around the motor and other noise-generating components. You can use materials like acoustic foam or mass loaded vinyl to absorb and block sound waves.
  2. Upgrade to a better muffler: Many dust collectors come with mufflers, but they may not be very effective in reducing noise levels. You can upgrade to a better muffler or add an additional muffler to your dust collector to further reduce noise.
  3. Use a remote control switch: If your dust collector has a remote control switch, you can turn it on and off from a distance, which can help reduce the noise level in your workspace.
  4. Optimize airflow: If your dust collector is struggling to move air efficiently, it may be generating more noise. Make sure your ductwork is properly sized and free from obstructions to optimize airflow and reduce noise.
  5. Consider a quieter dust collector: If your current dust collector is still too loud, you may want to consider upgrading to a quieter model. Look for dust collectors with lower decibel ratings and more efficient motors to minimize noise levels.

Which is better cyclone dust collector or dust deputy?

In my opinion, the choice between a cyclone dust collector and a dust deputy will depend on your specific needs and budget. If I have a larger workshop and generate a lot of dust, a cyclone dust collector may be a better choice. It has a larger capacity for collecting dust and debris, which means it needs to be emptied less frequently.

Cyclone dust collectors are also more efficient at separating fine dust particles from the airflow, which can be beneficial for maintaining clean air in your workspace.

Data PointsCyclone Dust CollectorsDust Deputies
Dust SeparationGoodGood
PortabilityNot PortablePortable
MaintenanceModerate to HighLow to Moderate

On the other hand, if I have a smaller workspace or I am just getting started with dust collection, a dust deputy may be a more affordable and practical option. It is often less expensive and can be a good option for hobbyists. Dust deputies can also be more portable and easier to move around, which may be beneficial if I need to move my dust collection system from one machine to another.

In summary, the choice between a cyclone dust collector and a dust deputy will depend on various factors such as the size of your workshop, the amount of dust you generate, your budget, and your overall dust collection needs.


  1. Are dust collectors noisy?

Yes, dust collectors can be noisy. The noise level of a dust collector depends on its motor and fan, and can vary depending on the model and type of dust collector.

2. Is a 1hp dust collector enough?

It depends on the size of your workshop and the type of machines you are using. A 1hp dust collector can be sufficient for small to medium-sized workshops and machines with lower dust and debris output, such as sanders and routers.